Getting started
Speed dial setup
The telephone base has 10 speed dial locations where you can store the telephone numbers you wish to dial using fewer keys than usual. You can store up to 32 digits in each location.
Enter, edit or delete a speed dial number
1. When the telephone is idle, press MENU/ENTER.
2.Press 
or 
to scroll to Speed dial setup. Press
MENU/ENTER.
Mailbox setup Base setup
COVM
>Speed dial setup
3.Press 
or 
to choose the desired speed dial location, then press MENU/ENTER.
4.Use the dial pad to enter or edit the telephone number up to 32 digits. If you want to delete the entry, erase all the digits.
•Press 
REP or SKIP
to move the cursor to the left or right.
•Press REMOVE to backspace and delete digits.
•Press and hold REMOVE to delete all digits.
>Speed dial 1 Speed dial 2 Speed dial 3 Speed dial 4
Enter phone #: 8888832445
ENTER=Save
Enter phone #: 8888832445
5. Press MENU/ENTER to save the setting and return to | ENTER=Save |
| |
the previous menu. There is a confirmation tone. To exit without making | |
changes, press EXIT. |
|
NOTES:
1.See Calling a speed dial number on page 37 for instructions on calling a speed dial number.
2.The memory locations for speed dial and the directory are not the same, so setting up speed dial numbers does not decrease your directory storage space.
Customer support
Use this feature to display the AT&T website.
1. | When the telephone is idle, press MENU/ENTER. | Base setup |
| Press to scroll to Customer support. Press MENU/ENTER. | |
2. | COVM | |
|
| Speed dial setup |
3. | To exit, press EXIT. | > Customer support |
www.telephones
.att.com
33
