AT&T SB67118 user manual Other options for answering the transferred call

Telephone base operation

Call transfer

Press or to scroll to the desired extension, then press MENU/ENTER.

3.The current line is put on hold. The destination extension rings and the call is answered by pressing

PHONE/FLASH on the cordless handset. You can announce the call. There is an intercom call between the corded handset and the extension.

Transfer to:

>Handset 1 Handset 2 Handset 3

4.Put the corded handset on the telephone base or press SPEAKER to hang up. The outside call is automatically transferred to the desired extension.

-OR-

PHONE/FLASH

1

Intercom 00:00:28

You can resume the call by pressing the corresponding flashing line key LINE 1-LINE 4 before the desired extension answers the call.

Hold Line 1

You hear a beep tone every 30 seconds when a transferred call has not been answered (To turn off the reminder beep, see Hold reminder on page 22).

NOTES:

1.If the desired extension does not answer the intercom call within one minute, the extension rings as an incoming call to remind the extension user.

2.If the outside call is put on hold for 10 minutes, it is automatically transferred to the auto attendant. The telephone base returns to idle mode.

Answer a transferred call

When you hear a short intercom ring from the telephone base:

Lift the handset to intercom with an extension. You can talk privately with the extension before picking up the outside call that is waiting on hold. Press the blinking LINE 1-LINE 4 when you are ready to talk to the outside call.

Other options for answering the transferred call:

•To answer using the telephone base speakerphone, press SPEAKER before pressing LINE 1-LINE 4.

•To answer hands-free using the corded headset, press HEADSET before pressing LINE 1-LINE 4.

•To answer hands-free using the cordless headset, press ON/OFF on the headset before pressing LINE 1-LINE 4.

49