AT&T SB67118 user manual Ring group, Do not disturb DND

Getting started

Telephone base setup

Ring group

Use this feature to specify which extensions receive incoming calls. By default, all extensions and the telephone base receive incoming calls. You can block some extensions from receiving calls, however, they can still be used to place outgoing calls.

1.When the telephone is idle, press MENU/ENTER.

2.Press or to scroll to Ringer setting. Press

MENU/ENTER.

Directory

Call log

>Ringer setting Mailbox setup

3.Press or to scroll to Ring group. Press MENU/ENTER.

4.Press REP or SKIP to select the desired line (L1, L2, L3, L4) while Ring group flashes.

5.Press or , then, while Extension number: flashes, press the extension number on the dial pad

(*,1,2,3,4,5,6,7,8,9,0) that you want to delete from the ring group, or press the number again to add it up to the group.

6.Press MENU/ENTER to save the setting and return to the previous menu. There is a confirmation tone. To exit without making changes, press EXIT.

Ringer volume

Ringer tone

>Ring group

Ring group: L3 Extension number: *1234567890 <>

Ring group: L3 Extension number: *1-3-56-8-0

ENTER =Save

NOTE: The symbol * represents the telephone base; 0 represents extension 10.

Do not disturb (DND)

Use this feature to silence your telephone base. When you activate the do not disturb function, you will not hear paging tones, voice paging, or incoming call rings.

Instead, the LINE 1-LINE 4 indicator flashes to signal an incoming call. If you receive an intercom call, the extension number of that intercom call appears on the screen display.

1. Press DND twice to prevent interruptions. The DND	DND
indicator turns on.

2. Press DND again to resume normal call alerts. The DND indicator turns off.

18