Balcar R410A service manual 148, SuMoTuWeTh Fr Sa

9. How to change the program operation time

1.	Push	PROGRAM button in the normal display		4.	Each push	SET button, the flashing
	status.				part changes in the following figure. Put
2.	Select the required day reserve mark				the indication on the time to be changed.
	by pushing		DAY button.	5.	Using HH / MM buttons, change the time.
3.	Push	SET	button.	6.	Push SET	button.

12.Matters to be memorized

1.Power failure

When a power failure occurred and the power supply has been reset, the display of the right figure appears. (A colon “: ” flashes.)

• Resuming of operation

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2 ERROR

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2	ERROR
PROGRAM3

WEEKLY TIMER 9

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

7.Push PROGRAM button. Then the change operation has completed.

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2	ERROR
PROGRAM3

1)	Turn on the power (breaker) of the air condi-
	tioner.
2)	Start operation by the remote controller.
3)	Push PROGRAM button of the program weekly timer.
	The flashing colon “: ” changes to the clock
	display in the normal status. In this case, the
	program is memorized by the backup function.
	Therefore, it is unnecessary to set the program
	again.

PROGRAM3

WEEKLY TIMER

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

10

11

2. Operation of program weekly timer and air conditioner

– 148 –

10.How to clear the program operation

•Clear of the day of the week

1) Push PROGRAM button.

2)	Push	DAY	button and select the
	reserve mark to be cancelled.
3)	Push	CLEAR	button. The program time
	disappears.

4)Push PROGRAM button. The operation reserve indication disappears.

•Clear of a part of the program

1)Push PROGRAM button.

2)	Push	DAY button and select the
	reserve mark on a to be cancelled.
3)	Push	SET	button.
4)	Push	SET	button again to flash ON

or OFF time of the program to be cancelled.

5)Push CLEAR button.

Then, a part of the program has been cancelled. At the same time, the remained programs are automatically arranged.

6)Push PROGRAM button.

11. How to set up the holiday

•The operation reserve day can be cancelled by setting up the holiday.

1)Push CANCEL button. The holiday setup mark flashes.

2)	Push	DAY button and select the
	holiday setup mark			on the day
	which the holiday is		set.
3)	Push	SET button. The flashing
	holiday setup indication				changes
	on. (	)

•Clearance of [HOLIDAY] setup

1)Push CANCEL button.

2)	Push	DAY			button and select the
	holiday setup mark					on the day to
	which the holiday is					cancelled.
3)	Push		SET		button. The holiday setup
	mark			disappears and the operation

reserve mark appears.

•Explanation of operation

The cancel setting day is temporarily canceled, and from the next day, the

cancel setup mark disappears and the operation reserve mark appears.

CAUTION

An air conditioner mounted with a program weekly timer is operated on a remote controller and on the program weekly timer.

(Example)

1) Operation pattern in a day

8:00

12:00

12:40

16:50 17:00

19:00

SuMoTuWeTh Fr Sa

Program timer

ON

OFF

ON

OFF ON

OFF

PROGRAM1

ON/OFF setup

PROGRAM2

ERROR

Push

Push PushPush

Remote controller

PROGRAM3

operation

Start/Stop button

ON :

Air conditioner

operation

OFF :

2) Operation pattern in a week

SuMoTuWeTh Fr Sa

Timer operation

No timer operation

No timer operation

(No reserve)

(Reservation is canceled as holiday)

RBC-

•For the day which does not set timer, the cancellation cannot be set.

EXW21E