Balcar R410A Hanging of indoor unit, Mounting of filter and canvas for suction port, 107

RAV-SM560, 561, 800, 801BT-E

RAV-SM1101, 1401BT-E

Hanging of indoor unit

Lift up the unit with a lifter, etc., and set the hanging metal in the hanging bolt.

•Hook nut of the hanging bolt to the groove of the hanging metal on the main unit.

•Using the level, etc., install the main unit horizontally. Failure to do this will cause water leakage

Washer

Hanging bolt

Nut

Hanging bracket

Mounting of filter and canvas for suction port

1.Mount a long-life filter or a high-performance filter according to each Installation Manual.

2.Mount the canvases for suction port to the lower side of the above filter.

Mounting of remote controller

For the mounting of the wired remote controller, refer to the Installation Manual attached to the remote controller.

•Take out the remote controller cord together with the refrigerant pipe or drain pipe. Be sure to set the remote controller cord so that it passes through the upper side of the refrigerant pipe and drain pipe.

For reference

<Square duct> (Procured locally)

Return Air side		Supply Air side
G-Ø5 mm holes	For supply	G-Ø5 mm holes
	air side

For return air side

						28										28
			C									D
			B
			A									A
		18	15	18					18			15		18
28		25	25	25	28			28	25				25	25	28
			F			E			K			F		K			E
			25		28	I							25		28	I
28	18	J	J		18	25		28	18	J			J		18		25
			H										H
			A									A
			Model	A		B		C	D	E	F	G	H	I	J		K
	Return Air side		SM561BT	700		—		400	—	420	390	4	350	195	—		—
			SM801BT	1000		700		430	—	420	390	8	500	195	350		—
(Return filter side)
			SM1101, 1401BT	1350		1050		580	—	420	390	8	675	195	525		—
			SM561BT	550		455 (65 x	7)	65	530	265	245	20	275	132.5	227.5		130
	Supply Air side		SM801BT	850		715 (65 x 11)		65	830	265	245	28	425	132.5	307.5		130
			SM1101, 1401BT	1200	1105 (65 x 17)			65	1180	265	245	40	600	132.5	552.5		130
							– 107 –