Balcar R410A service manual 6 3, 4, 3, 146

4. Setup of the day of the week

•Set the today of the week. (Example: Case of Wednesday)

1 While push SET button push DAY button to select “today” of the week.

• While pushing	SET button, each push
DAY button, the display of the present
day of the week	flashes, and the display
moves in order.

SuMoTu WeTh Fr Sa

CAUTION

	SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2	ERROR
PROGRAM3

WEEKLY TIMER 1

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

3 Set ON time by HH ,		MM buttons,
and then push	SET	button.
When push SET	button, the

flashed ON time (8:00 in example) change, and OFF time of the program 1 flashes at the same time.

PROGRAM1

PROGRAM2

PROGRAM3

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2	ERROR
PROGRAM3

WEEKLY TIMER

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

6

3, 4, 5

3, 4

•	The day of the week cannot be changed only when DAY button is pushed.
•	If 30 seconds have passed while the button is flashing without pushing DAY or HH / MM
	buttons, the display returns automatically to the original display (Normal display).
	In this case, repeat the procedure from the 1st step.

5. How to set program timer operation

4 Set OFF time by HH / MM buttons, and then push SET

button.	PROGRAM1
When pushing SET button, the flashed ON time (12:00 in	PROGRAM2
example) changes, and ON time of the program 2 flashes.
	PROGRAM3

– 146 –

Set the present time and the present day of the week surely, otherwise the program operation is not correctly performed.

This timer can control up to 3 cycle program per day. (1 cycle or 2 cycles can be also set up.)

The following items can be set to the program operation.

•Setup of [ON] ® [OFF] time ([ON] or [OFF] only cannot be set up singly.

<Name and functions>

5 Next set up the operation time to the program 2 and 3.

When pushing SET button after OFF time of the program 3 has been set, the flashed OFF time (19:00 in example) changes and ON time of the program 1 flashes.

6 Finally, push PROGRAM button.

Push PROGRAM button within 30 seconds after No. 5 step.

Then, one day timer (Monday in example) is set completely.

PROGRAM1

PROGRAM2

PROGRAM3

2

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2	ERROR
PROGRAM3

WEEKLY TIMER

Operation time of program 1 Operation time of program 2 Operation time of program 3

ON/OFF is displayed when the present time is included in the range of the set time.

(In the above status, the contents of the program 1 are displayed as the present time is included in the range from ON time to OFF time of the program 1.)

7 Setting to other da y, repeat abo ve pr ocedure fr om 1 to 6.

PROGRAM1

PROGRAM2

PROGRAM3

1

PROGRAM DAY SET CANCEL

HH MM CLEAR CHECK

Example:

To set the operation time of Monday as follows: From 8:00 to 12:00

From 12:40 to 16:50 Operates From 17:00 to 19:00

If you need to set the same time as previous setting. Refer to “7. How to copy the program operation time”.

CAUTION

1 First push PROGRAM button.

•When pushing PROGRAM button, the reserve mark flashes.

2 Push	DAY	button, select the day for operation and
then push		SET	button.
When pushing			SET button, the flashed reserve mark

changes, and ON time of the program 1 flashes at the same time.

SuMoTuWeTh Fr Sa

PROGRAM1

PROGRAM2

PROGRAM3

• Setup of the program time : is treated as . (Example) In the following cases, setup are available.

ON timeOFF time

• If 30 seconds have passed while the button is flashing without pushing DAY or HH / MM buttons, the display returns automatically to the original display (Normal display).

In this case, repeat the procedure from the 1st step.

RBC-EXW21E