Baldor Baldor manual MN850 Applications B-3

Section 1

General Information

			Read Only Parameter Values
Title	P#	Parameter		Adjustable Range		Factory	User Setting
Parameters	P74	2nd Last Trip		1–16 (Status Code)	0
	P75	3rd Last Trip		1–16 (Status Code)	0
	P76	4th Last Trip		1–16 (Status Code)	0
	P77	5th Last Trip (Oldest trip)		1–16 (Status Code)	0
	P78	Protection Mode 2		0–192	192 (Full + Optimize)
	P79	Start Pedestal 2		10–60%	50 (% of line volts)
	P80	Start Time 2		1–255 seconds	5 seconds
	P81	Kick Pedestal 2		60–90%	75 (% of line volts)
	P82	Kick Time 2		10–40 seconds	25 seconds
	P83	Dwell 2		1–255 seconds	5 seconds
	P84	Stop Pedestal 2		10–60 seconds	10 seconds
	P85	Stop Time 2		0–255 seconds	0 seconds
	P86	Auto Config 2		0–255	6	(Bit 00000110)
	P87	Under Current 2		0–1 (x Ie) Amps	0.125 x Ie Amps
	P88	Under Current Time 2		5–255 seconds	50 seconds
	P89	Current Limit 2		0–8 (x Ie) Amps	4 x Ie Amps
	P90	Current Limit Time 2		5–255 seconds	15 seconds
	P91	Shearpin 2		1–5 (x Ie) Amps	3 x Ie Amps
	P92	Shearpin Time 2		5–255 cycles	50 cycles
	P93	Overload Level 2		0.5–2 (x Ie) Amps	1.09375 x Ie Amps
	P94	Overload Delay 2		10–140 seconds	140 seconds
	P95	User Flags 1 (for 2nd param set)		0–255	134 (Bit 10000110)
	P96	User Flags 2 (for 2nd param set)		0–255	64 (Bit 01000000)
	P97	Flag 1 I/P Source Address		0–125	0	(Parameter #)
	P98	Flag 1 I/P Source Mask		0–128	0	(bit 00000000)
	P99	Flag 1 O/P Destination Address		0–125	0	(Parameter #)
	P100	Flag 1 O/P Destination Mask		0–255	0	(bit 00000000)
	P101	Flag 2 I/P Source Address		0–125	0	(Parameter #)
	P102	Flag 2 I/P Source Mask		0–20	0	(bit 00000000)
	P103	Flag 2 O/P Destination Address		0–125	0	(Parameter #)
	P104	Flag 2 O/P Destination Mask		0–11	0	(bit 00000000)
	P105	Loop Input		0–125	41 (Parameter #)
	P106	Loop Feedback		0–125	26 (Parameter #)
	P107	Error Gain		1–255	37
	P108	Error Divisor		1–255	7
	P109	Max Slope		0–50	10
	P110	Guard Gap		0–150	10

MN850 Applications B-3