27
N Wireless Router
sectionstable of contents 1234 6789105
alTeRNaTe seTUP MeTHod
(1)
(2)
(4)
(5)
(3)
(6)
setting your Internet ser vice Provider (IsP) Con nection
Type to Point-to-Point Tunneling Protocol (PPTP)
[European Countries O nly] Some ISPs req uire a connection using PPTP
protocol, a type of con nection most co mmon in European c ountries.
This sets up a direct connection to the ISP’s system. Type in the
information provided by your ISP in the spa ce provided. When you have
finished, click “Apply Cha nges” (9). After yo u apply the chang es, the
Internet Status indicat or will read “conne ction OK” if your Router is set
up properly.
1� PPTP account
Provided by your ISP. Enter your PPT P account name h ere.
2� PPTP Password
Type in your password and ret ype it into the “ Retype Password” box to
confirm it.
3� Host Name
Provided by your ISP. Enter your ho st name here.
4� get IP by dHCP
If your ISP provided you w ith a specific IP address, unche ck this box
and enter your IP addres s, subnet mask, and default gateway in the
fields that appear.
5� service IP addr ess
Provided by your ISP. Enter your se rvice IP addres s here.