Blodgett BC-20G manual Standard Controls, Operation, Controls Identification

Operation

Standard Controls

	1
2
	4
3	6
5	7
8
	10
9	11

Figure 7

CONTROLS IDENTIFICATION

1.POWER ON LAMP --- when lit indicates power to the unit is turned on.

2.MODE SELECTOR SWITCH --- turns power to the oven on or off. Allows selection of Steam, Hot Air, Combi or Cool Down Modes.

3.TEMPERATURE DIAL --- used to set desired cooking temperature.

4.HEAT ON LIGHT --- When lit indicates that the unit is heating. The light goes off when the unit has reached the set temperature.

5.STEAM ON DEMAND TIMER --- used to set steam time

6.STEAM ON DEMAND SWITCH --- used to ini- tiate steam injection cycle

7.STEAM ON DEMAND LAMP --- illuminated when steam on demand is activated.

8.TIMER DIAL --- used to set desired cook time.

9.FAN SPEED SWITCH --- used to select low or high speed.

10.DELIME LAMP --- Flashes when steam gener- ator deliming is needed. Remains steady when deliming process is active.

NOTE: BC14DS does not have a delime lamp.

11.FILL LAMP --- illuminated until the steam gen- erator is filled with water

NOTE: BC14DS, the direct steam unit, does not have a fill lamp.

17