Briggs & Stratton Year 2010 REP, ODUC, Access Ports, REPRODUCTION, System Control Panel, To open access door:, To close access door:

System Control Panel					Each generator is supplied with a set of identical keys. These
The system control panel is a printed circuit board that is					keys fit the locks that secure the access doors.
The system control panel is a printed circuit board that is
integrated with the control panel of the generator. It contains					To open access door:
all the logic circuits, operator controls, and system displays					1. Insert key into lock of access door handle and turn key
necessary to operate, program, and protect the generator. The					1. Insert key into lock of access door handle and turn key
					one quarter turn counterclockwise.
system control panel interprets and monitors electrical inputs					one quarter turn counterclockwise.
					2. Grasp door’s handle and turn one quarter turn
from related circuits throughout the unit.					2. Grasp door’s handle and turn one quarter turn
from related circuits throughout the unit.					counterclockwise to open. Remove key.
Please refer to the supplied Control Panel Application Guide					counterclockwise to open. Remove key.
					3. Coolant Fill door is unlocked in the same manner. It can
for detailed information about the control panel.					3. Coolant Fill door is unlocked in the same manner. It can
for detailed information about the control panel.					be used for adding coolant or oil.
Access Ports					To close access door:
Access Ports					1. Close door and turn door’s handle one quarter
The generator is equipped with an enclosure that has					1. Close door and turn door’s handle one quarter
The generator is equipped with an enclosure that has					turn clockwise.
several access doors. The doors are named for a significant					turn clockwise.
several access doors. The doors are named for a significant					2. Insert key into lock of door handle and turn key one
component located behind them, as follows::					2. Insert key into lock of door handle and turn key one
A -		Fuel Inlet port (shown for reference)			quarter turn clockwise. Remove key.
A -		Fuel Inlet port (shown for reference)
B -		Control Panel door
C -		Exhaust opening (shown for reference)			The enclosure also includes muffler and radiator access
D -		Coolant Fill door			panels, used for cleaning those components. Those panels
E -		Battery door			should remain closed at all other times to assure proper
E -		Battery door			cooling, reduce noise, and for added safety.
F -		Muffler door			cooling, reduce noise, and for added safety.
F -		Muffler door

		WARNING Contact with muffler area could cause burns
			resulting in serious injury.

	•	DO NOT touch hot parts and AVOID hot exhaust gases.
	•	Allow equipment to cool before touching.
			NOT
			NOT
			for		D
			for
				REPRODUCTION

	B
A		E
	F	E
	F