40 C H A P T E R S I X

See Storing One Touch Dial Numbers pp. 20-21

See

Storing

Speed Dial

Numbers

p. 22

One Touch Dialing

1Pick up the handset—OR—Press Speaker Phone .

2When you hear a dial tone, press the One Touch key of the location you want to call.

If you try to use a One Touch location with no number stored in it, you hear a warning sound, and the screen displays NOT REGISTERED. The display returns to normal after 2 seconds.

Speed Dialing

1Pick up the handset—OR—Press Speaker Phone .

2When you hear a dial tone, press Speed Dial , then press the two-digit Speed Dial number.

3To hang up, replace the handset—OR—Press Speaker Phone .

Hold

1Press Hold to put a call on Hold.

2You can put down the handset without disconnecting the call.

3Pick up the FAX/MFC handset to release the call from Hold. Picking up an extension handset will not release the call from Hold.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers.

Tone/Pulse

If you have pulse dialing service, but need to send tone signals (for telephone banking, for example), follow the directions below. If you have touch tone service, you do not need this feature to send tone signals.

1Lift the handset.

2Press . Any digits dialed after this send tone signals.

3When you hang up, the FAX/MFC returns to pulse dialing service.

Page 48
Image 48
Brother MFC 1970MC, MFC 1870MC, FAX1 570MC owner manual One Touch Dialing, Hold, Pause, Tone/Pulse