7

 

43

 

C H A P T E R S E V E N

 

Advanced

 

Fax Operation

 

Sending Faxes

Quick Scan Fax Transmission

You can scan a fax into the FAX/MFC’s memory to be sent as soon as the scan is complete. This way, you don’t have to wait for the entire fax to be transmitted before you retrieve your original.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the Quick Scan operation.

1Insert the document in the feeder.

2Press Q.Scan . The screen indicates how much memory is available.

3Enter the fax number.

4Press Start to begin scanning the document into memory. Once the scan is complete, the FAX/MFC dials the call.

See

Delayed

Transmission

p. 44

and

Delayed

Polling

p. 55

Daily Timer

You can use this function to set a time to send a fax every day. The setting stays the same until you change it. Then, when you use Delayed Transmission the time will be displayed automatically.

1Press Function , 7 , 2 .

2Use the dial pad to enter the time in 24-hour format (for example, enter 19:45 for 7:45 PM).

3Wait 2 seconds, then press Stop to exit.

Page 51
Image 51
Brother MFC 1970MC, MFC 1870MC, FAX1 570MC owner manual Quick Scan Fax Transmission, Daily Timer