Brother FAX1 570MC Receiving Faxes, Automatic Transmission, Manual and Automatic Fax Redial

B A S I C F A X O P E R A T I O N 33

See

Speed Dial

p. 22

4When you hear the fax tone, press Start .

5If you’re using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax.

IMPORTANT: Do not pick up the handset or press Speaker Phone .

1Insert the document face down in the feeder.

2Enter the fax number using One Touch, Speed Dial, Tel-index or the dial pad.

3Press Start .

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the number.

If you’re sending a fax automatically, and if the line is busy, the FAX/MFC will redial automatically up to three times at 5 minute intervals.

Receiving Faxes

See Distinctive Ringing pp. 51-52

See

F/T (Fax/Tel)

Mode Only

p. 50

Select Answer Mode

Manual—You must answer all calls yourself. If you hear fax tones, press Start to begin receiving the fax, then hang up. You can use this mode with Distinctive Ringing.

Fax Only—The FAX/MFC automatically answers every call as a fax call. You cannot receive a voice call, but you can dial out and make a voice call.

F/T—The FAX/MFC automatically answers every call. If the call is a fax, it prints the fax. If the call is not a fax, it signals you with a double ring (ring-ring), different from the phone company ringing, to alert you to pick up the call. If you select this setting, you’ll need to set the Ring Delay and F/T Ring Time features (on the following pages). If you have extension phones on the same line as the FAX/MFC, set Ring Delay to 4.