5 Inserting the output paper
1Open the sheet feeder flap by lifting it up at the side.
2Lift the paper support bar.
3Insert up to 30 sheets of paper between
the paper guides and adjust the left paper guide
(a)to the width of the paper. Press the clip (b) and allow the paper to fall down into position.
*Keep the document support bar raised when printing
a
b
Setting up
IMPORTANT
It is important to have the document support bar raised during printing to prevent paper feeding back into the machine.
IMPORTANT
Use A4 paper of 80gsm. The paper should be non- transparent and not torn or crumpled.
6 Charging the handset
IMPORTANT
The new handset may not be charged. It takes up to 12 hours to charge completely.
The handset is powered by a rechargeable NiCad battery. The charger uses a fast charge system. For example, 10 minutes of charging will give about 10 minutes of talk time. When fully charged the battery should give up to 5 hours talk time and up to 50 hours standby.
When the handset is not in the charger, the charging icon indicates the current level of charge in the battery - 4 dots means the handset is fully charged and 1 dot means the charge is low.
eg 50% charge
11
