2When the page that is being sent has gone through, the other person’s telephone will ring and if they pick up, your handset will then ring.
3Answer the handset as normal and speak.
If the person you are sending the fax to wants to speak to you while the document is being faxed to them, your handset will ring - answer as normal.
Receiving a fax
You can set your DECTfax to print faxes as they are received or incoming faxes can be stored in the memory, up to 20 Slerexe* pages, and printed out at a later date. The default setting is for memory receive to be switched on.
To switch off memory receive
When memory receive is off, you must ensure paper is in the sheet feeder.
1Press Function then 3 then 6. The display shows 36 RX IN MEM.
D |
| MN | |
E | |||
3 | F | 6 | O |
|
|
| |
2Press Function. The display shows two
options:
| Using your fax machine |
N O | Incoming faxes are printed as |
| they are received. If there is no |
| paper in the sheet feeder, the |
| faxes are stored in the memory. |
3Use the ◀ and ♣ buttons to select NO. Press
Function to confirm the change.
If you answer a call on a telephone that is on the same line as the DECTfax, and the call is a fax, you activate the DECTfax by pressing # then 7 on the telephone keypad then hanging up the telephone when you hear the tones from the DECTfax.
To print out received faxes
When you have faxes stored in the memory the Fax button light will flash. You can print in normal mode or economy mode.
Normal
•Make sure you have paper in the sheet feeder. Press the Fax button. The stored faxes will print out.
Y E S Incoming faxes are stored in the memory, even if there is paper in the sheet feeder. This is the default setting.
* Slerexe is the name for the standard fax page.
Economy
This allows you to print out messages reduced by 50% vertically so that two pages fit onto one A4 printout.
19
