Canon H12157 manual Dial the other party’s fax number

2.Dial the other party’s fax number.

T E L = 1 p 2 3 4 5 6 7 8

❏Use one of the dialing methods described on page 6-17.

❏If you must first dial a digit to get an outside line (“9” for example), add a pause after that digit by pressing the Pause button, as shown in the example above.

3.Press Start/Copy.

Start /Copy

❏The LASER CLASS 2060P then begins scanning the document into memory and dials the number.

After a few seconds, the display shows the number of pages it has scanned.

T E L =	1 p 2 3 4 5 6 7 8
S C A N N I N G D O C .		P . 0 0 1
T R A N S M I T		0 0 3 0
S C A N N I N G D O C .		P . 0 0 1

The display then shows the transaction number for the fax. This is a unique number the LASER CLASS 2060P assigns to the document, and is used to identify the document in transaction reports.

The display continues to show these three displays in order while the fax is sending.

❏When the LASER CLASS 2060P finishes sending the fax, the display shows the TRANSMITTING OK message.

NIf an error occurs during sending, the LASER CLASS 2060P will print out an error report. If this happens, try sending the fax again. See “Faxing Problems” on page 13-29 for details about errors.

Sending Faxes

Chapter 6 Sending Faxes 6-21