Canon H12157 manual Setting Up Polling Sending, Before You Can Be Polled to Send

Setting Up Polling Sending

This section shows you how to set up your fax to store and hold a document until it is polled by another fax to send it.

Before You Can Be Polled to Send

Before you set up your polling box, contact the parties who are going to poll your fax to receive documents and confirm the following points:

❏If you are using an ITU-T password for the polling box, they must also know this password. This password setting is optional.

❏Your TX PASSWORD must match the ITU-T password attached when the other party calls you. Confirm that the TX PASSWORD on your fax matches the ITU-T password attached when the other party calls you.

❏If the other party’s fax does not support ITU-T subaddress/password transactions, do not set the password.

Setting Up a Polling Box

Before you can use polling sending, you must create a polling box with the POLLING BOX of the Menu System. The polling box holds the document in the memory until the other party prompts (polls) your fax to send the document.

1.Open One-Touch Speed Dial panel.

2.Press Data Registration.

Data

Registration

R E G I S T R A T I O N

1 . D A T A R E G I S T R A T I O N

9-6Setting Up and Using Polling Chapter 9