Canon H12157 manual Choosing a Location for Your, Laser Class 2060P

Choosing a Location for Your

LASER CLASS 2060P

Before unpacking your LASER CLASS 2060P, follow these guidelines to choose an appropriate location for the unit.

CPlease review the information provided in “Safety Instructions” on pages 1-12 to 1-14, to make sure you are installing your LASER CLASS 2060P for safe use.

❏Put the LASER CLASS 2060P in a cool, dry, clean, well ventilated place:

•Make sure the area is free from dust.

•Make sure the location is not affected by extreme temperature fluctuations, and remains between 50º and 90.5ºF (10º and 32.5ºC).

•Make sure the area’s relative humidity is always between 20% and 80%.

❏Keep the LASER CLASS 2060P away from direct sunlight.

❏If possible, place the LASER CLASS 2060P near an existing telephone outlet, to allow for an easy connection of the telephone line to the unit.

❏Place the LASER CLASS 2060P near an electrical wall outlet that accepts a three-prong grounded plug, and that provides 120-volt AC (60 Hz) power. (This is standard for U.S. outlets; if you have any doubts, contact an electrician to check the power for you.)

❏Place the LASER CLASS 2060P near the PC you will be connecting it to. Make sure you can reach it easily, as you will be using the LASER CLASS 2060P as a printer, fax machine, copier, and telephone.

❏Do not plug the LASER CLASS 2060P into the same circuit as an appliance such as an air conditioner, electric typewriter, television, or copier. Such devices generate electrical noise that can interfere with your unit’s ability to send or receive faxes.

❏Set the LASER CLASS 2060P on a flat, stable, vibration-free surface that is strong enough to support its weight (about 28 lb/13 kg).

Setting Up Your LASER CLASS 2060P

Chapter 2 Setting Up Your LASER CLASS 2060P 2-3