Canon H12157 manual RX Settings, 15-10The Menu System

RX SETTINGS

1.ECM RX	Turn the ECM (error correction mode) receiving off and on. This switch does
	not affect the button setups for One-Touch or Coded Speed Dialing.
ON	All receptions are conducted with ECM if the other party’s fax supports
	ECM.
OFF	ECM is turned off.
2.RX MODE	Set the receive mode.
FAX/TEL AUTO SW	This mode is economical, it allows you to have phone and fax service
	without the expense of an additional phone line.
RING START TIME	Set the duration that the LASER CLASS 2060P listens for a fax tone before
	starting to ring.
	8 SEC (0 to 30)
F/T RING TIME	Set the length of time the LASER CLASS 2060P will ring to alert you of an
	incoming call.
	15 SEC (10 to 45)
F/T SWITCH ACTION	Select the action taken after the F/T RING TIME expires.
RECEIVE	The fax will switch to fax receive mode automatically at that point and start to
	receive the document.
DISCONNECT	The fax disconnects the call.
FAX ONLY MODE	Use this mode if the LASER CLASS 2060P will be connected to a separate
	telephone line used only for transmitting faxes. The LASER CLASS 2060P
	then answers all calls, and receives all faxes automatically.
DRPD	Some phone companies offer a distinctive ring pattern (DRP) service
	whereby they assign two or more telephone numbers with distinctive ring
	patterns to a single telephone line.
NORMAL RING	Ring type of normal telephone line.
DOUBLE RING	Two short rings at regular intervals.
SHORT-SHORT-LONG	Short-short-long at regular intervals.
SHORT-LONG-SHORT	Short-long-short at regular intervals.
OTHER RING TYPE	Patterns other than those described above.
Above settings:	UNIT TELEPHONE #
	UNIT NAME
	RX MODE TEL, FAX, FAX/TEL AUTO SW
FAX/TEL AUTO SW	RING START TIME	8 SEC (0 to 30)
	F/T RING TIME	15 SEC (10 to 45)
	F/T SWITCH ACTION	RECEIVE/DISCONNECT

(Default settings are shown in bold type)

15-10The Menu System Chapter 15