Canon H12157 manual Safety Instructions, 12Introducing the Laser Class 2060P

Safety Instructions

Read these safety instructions thoroughly before using your

LASER CLASS 2060P, and keep them handy in case you need to refer to them later.

CExcept as specifically described in this user’s guide, do not attempt to service the LASER CLASS 2060P yourself. Never attempt to disassemble the unit: opening and removing its interior covers will expose you to dangerous voltages and other risks. For all service, contact your local authorized Canon Facsimile Dealer.

❏Always follow all warnings and instructions marked on the LASER CLASS 2060P.

❏Use the LASER CLASS 2060P only on a sturdy, stable, level surface. If the unit falls, it could be seriously damaged.

❏Do not use the LASER CLASS 2060P near water. If you spill liquid on or into the unit, unplug it immediately and call your local authorized Canon Facsimile Dealer.

❏The back of the LASER CLASS 2060P includes slots and openings for ventilation. To keep the LASER CLASS 2060P from overheating (which can cause it to operate abnormally and create a fire risk), take care not to block or cover these openings. Do not operate the unit on a bed, sofa, rug, or other similar soft surface, or near a radiator or other heat source. Do not place the LASER CLASS 2060P in a closet or cabinet or on shelves unless adequate ventilation is available. See “Choosing a Location for Your LASER CLASS 2060P” on page 2-3 for guidelines on how much space the unit needs for ventilation.

❏Operate the LASER CLASS 2060P only from the type of power source indicated on the unit’s label. If you are unsure of the type of power available from your wall outlets, contact your local power company.

❏Make sure the total amperage used by all devices plugged into the wall outlet does not exceed the ampere rating of the outlet's circuit breaker.

❏Do not allow anything to rest on the power cord and do not place the LASER CLASS 2060P where the cord will be walked on. Make sure the cord is not knotted or kinked.

1-12Introducing the LASER CLASS 2060P Chapter 1