Installing/Replacing the Toner Cartridge

The LASER CLASS 2060P uses a Canon FX-3 toner cartridge. The procedure below explains how to install the cartridge for the first time, and how to replace it when the toner runs out.

When the message REPLACE CARTRIDGE appears, the toner in the cartridge may simply be unevenly distributed. Before replacing the cartridge, follow the instructions on page 13-28 to evenly distribute the toner. If after doing this the message remains displayed or the print quality is low, replace the cartridge as described below.

NCanon makes numerous cartridges. The FX-3 toner cartridge has been designed specially for the LASER CLASS 2060P and is the only one Canon recommends that you use.

1.Remove any documents and/or printed pages from the unit.

2.Make sure the LASER CLASS 2060P is plugged in.

3.Open the front cover by lifting the right side release latch of the unit.

Lift the cover forward to its open position.

2-34Setting Up Your LASER CLASS 2060P

Chapter 2

Page 68
Image 68
Canon H12157 manual Installing/Replacing the Toner Cartridge, 34Setting Up Your Laser Class 2060P