Canon H12157 manual Print Quality Problems, 13-28Frequently Asked Questions

Print Quality Problems

If the print quality is not what you expect it to be, check the problems and solutions below.

Problem Possible cause Solution

Print is not clear?	The medium you are using
	may not be supported by the
	LASER CLASS 2060P.
	You may be printing on the
	wrong side of the paper.

Use only print media specified in “Guidelines for Selecting Print Media” on page 4-2.

Many types of paper have a “correct” side for printing. If your paper does, make sure that side is facing up. If the paper has no obvious correct side, try turning the paper over and printing on the other side.

The printout has vertical	Toner may be low or be
white streaks?	unevenly distributed.

Follow these steps:

1.Open the front cover and take out the FX-3 toner cartridge.

2.Gently rock the cartridge side to side five or six times to evenly distribute the toner inside.

3.Put the cartridge back into the unit.

4.Close the front cover and try printing again.

If this does not solve the problem, replace the FX-3 cartridge.

13-28Frequently Asked Questions Chapter 13