Canon H12157 manual Setting the RX Mode, FAX only Mode

❏FAX ONLY MODE

Use this mode if the LASER CLASS 2060P will be connected to a separate telephone line used only for transmitting faxes. The LASER CLASS 2060P then answers all calls, and receives all faxes automatically.

❏ANS.MACHINE MODE

Use this mode if you plan to connect an answering machine to the LASER CLASS 2060P to receive faxes and phone messages. The LASER CLASS 2060P then receives incoming faxes normally, and routes incoming phone calls to the answering machine.

Once you have decided which mode you want, set the mode as described in “Setting the Receive Mode” on page 7-4. You can change the mode at any time.

Setting the RX MODE

Set the LASER CLASS 2060P RX MODE as follows:

1.Open One-Touch Speed Dial panel, then press Data Registration.

Data	R E G I S T R A T I O N
Registration
	1 . D A T A R E G I S T R A T I O N

2.Press Set.

Set

D A T A R E G I S T R A T I O N 1 . U S E R S E T T I N G S

3.Use N or M to select 4.RX SETTINGS.

D A T A R E G I S T R A T I O N 4 . R X S E T T I N G S

4.Press Set, then use N or M to select 2.RX MODE.

Set

R X S E	T T I N G S
2 . R X	M O D E

Receiving Faxes

Chapter 7 Receiving Faxes 7-3