Canon H12157 manual TX Settings

TX SETTINGS

1.ECM TX	Turn ECM (error correction mode) transmission off and on. This switch does
	not affect the button setups for One-Touch or Coded Speed Dialing.
ON	All transmissions are conducted with ECM if the other party’s fax supports
	ECM.
OFF	ECM is turned off.
2.MID PAUSE SET	Set the length of the pause you insert into a dialing sequence.
	2 SEC (1 to 15)
3.AUTO REDIAL	Set whether to perform automatic redial when the other line is busy or no
	answer.
ON	Customize the redial operation.
	REDIAL TIMES	Set the number of retries.
		2 times (1 to 10)*
	REDIAL INTERVAL Set the period of time between redialings.
		2 minutes (2 to 99)
OFF	After the first attempt at dialing fails, redialing is not attempted.
4.TIME OUT	Set the interval between dialing (entering phone numbers) when sending to
	more than one destination.
ON	Fax scans the document in 5 or 10 seconds after you enter the phone
	number.
OFF	Press Start/Copy to scan the document. Otherwise, the unit will return to
	standby mode after 60 seconds.

(Default settings are shown in bold type)

*Even if this fax unit is set to redial several times, it will redial only once if there is no tone or there is a ring back tone during the first attempt.

15-8 The Menu System Chapter 15