Canon H12157 manual Location, Order Information, Power Requirements

USERS IN U.S.A.

PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE EQUIPMENT

A.Location

Supply a suitable table, cabinet, or desk. See Appendix for the unit’s dimensions and weight.

B.Order Information

1.Only a single line, touch tone, or rotary telephone set is to be used.

2.Order an RJ11-C modular jack (USOC code), which should be installed by the phone company. If the RJ11-C jack is not present, installation cannot occur.

3.Order a normal business line from your telephone company’s business representative. The line should be a regular voice grade line or equivalent. Use one line per unit.

DDD (DIRECT DISTANCE DIAL) LINE

or

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF

YOU COMMUNICATE OVERSEAS

NCanon recommends an individual line following industry standards [e.g., the 2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones]. A dedicated extension of a PBX unit without “Call Waiting” can be used with your unit. Key telephone systems are not recommended because they send non-standard signals to individual telephones for ringing and special codes, which may cause a fax error.

C.Power Requirements

This equipment should be connected to a standard 120 volt AC, three- wire grounded outlet only. Do not connect this unit to an outlet or power line shared with other appliances that cause “electrical noise.” Air conditioners, electric typewriters, copiers, and machines of this sort generate noise which often interferes with communications equipment and the sending and receiving of documents.

iv Preface