zWhen using Mac OS X
For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP Navigator as the starting application software in Image Capture under [Applications] of Mac OS X.
Important
zIf you are using Mac OS X v.10.4, the settings below are not necessary.
zMake sure that the MP Navigator is installed and that the Macintosh is connected to the machine before starting up Image Capture.
If you are using Mac OS X v.10.3.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Click [Options] at lower left of the scanner window, select [MP Navigator 2.1] from [Application to launch when scanner button is pressed], then click [OK]. Select [Quit Image Capture] from the [Image Capture] menu to exit Image Capture.
Important
If you select [Preferences] from the [Image Capture] menu, click [Scanner], and mark [Use TWAIN software whenever possible], [Options] is not displayed. In this case, click [Use TWAIN software whenever possible] to uncheck the option, exit Image Capture, then start it again.
If you are using Mac OS X v.10.2.4 or later
Select [Applications] from the [Go] menu, then double click [Image Capture]. Select [Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner button is pressed, open], select [MP Navigator 2.1] from [Applications], then click [Open]. Select [Quit Image Capture] from the [Image Capture] menu to exit Image Capture.
1Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18.
2Load the document on the Platen Glass.
For details on how to load documents, see “Loading Documents” on page 19. For details on setting film originals, see “Scanning a Film” on page 67.
3Select the connected computer to use.
(1)Press [SCAN].
The computer selection screen is displayed.
98 | Scanning Images | Chapter 8 |