z“Error No.: 2500 is Displayed” on page 162

z“For Windows Users” on page 162

If an error occurs when the machine is connected to a computer

When an error occurs in printing such as the printer is out of paper or paper jams, a troubleshooting message is displayed automatically. Take the appropriate action described in the message.

The message may vary depending on the version of your Windows operating system.

An Error Message is Displayed on the LCD

An error message is displayed on the LCD, take the corresponding countermeasure described below.

Message

Action

 

 

There are no photos in memory

z There are only invalid images on the memory card.

card.

z Photo data edited/processed on the computer should be printed from

 

 

the computer, not from the camera.

 

 

Ink has run out. Replace the ink tank

The ink has run out (The lamp on the ink tank flashes).

and close the cover.

Replace the ink tank, and close the Scanning Unit (Printer Cover).

 

U041

If printing is in progress and you want to continue printing, press [OK]

 

 

with the ink tank installed. Then printing can continue under the ink out

 

condition. Replace the empty ink tank immediately after the printing. The

 

machine may be damaged if printing is continued under the ink out

 

condition.

 

Note

 

If multiple ink tank lamps are flashing red, check how fast they flash. Fast

 

flashing (at about one second interval) indicates the ink is empty. Slow

 

flashing (at about three second interval) indicates ink is low. For details on

 

different flashing speeds, see “Knowing When to Replace Ink Tank” on

 

page 109.

 

Print head is not installed./The type Follow the directions given in the Setup Guide to install the Print Head.

of print head is incorrect.

If the Print Head is already installed, remove the Print Head and reinstall it.

 

 

If this error still remains, the Print Head may be damaged. Contact the

 

Canon Customer Care Center.

Chapter 12

Troubleshooting

127