3Specify the layout.
(1)Use [
] or [
] to select the layout, then press [OK]. The following layouts can be selected.
Bordered: | x2/x4/x8, Half, Half (w/line) |
Borderless: | x2/x4/x8, Half, Half (w/line) |
Album: | Album (4/right), Album (4/left) |
Mixed: | Mixed 1, Mixed 2, Mixed 3 |
Note
zWhen you select Borderless, the media type cannot be set to <Plain paper>.
zYou can select Mixed
4Specify the paste method.
(1)Use [
] or [
] to select the pasting method.
If you select <Paste all> then press [OK], all photos saved on the memory card are automatically pasted in the specified layout. Go to step 6.
If you select <Paste one by one> then press [OK], the photo selection screen is displayed.
5Paste photos one by one.
(1)Use [
] or [
] to display the photo to be pasted, then press [OK].
Note
You can do...
zTo search for photos with the shooting date (Search), see “Searching for Photos with the Shooting Date (Search)” on page 54.
zTo print a specified area (Trimming), see “Printing a Specified Area (Trimming)” on page 55.
(2)Repeat step (1) to paste photos.
Press [Back] to cancel the last pasted photo. Press [Stop/Reset] to cancel all pasted photos.
(3)Press [Color] after pasting all photos. The print confirmation screen is displayed.
Note
Pasting cannot be done over multiple pages. When you finish pasting photos for one page, print the page.
6Start printing.
See “Start printing.” on page 53.
Chapter 3 | Printing from a Memory Card | 57 |