Performing Infrared Communication
You can print photos in your mobile phone.
When printing through infrared communication, also refer to your mobile phone manual.
1Prepare for printing.
(1)Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 18.
(2)Load paper.
See “Loading Paper” on page 20.
(3)Ensure that the proper paper source is selected. See “Changing the Paper Source” on page 24.
2Set the print setting.
See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone” on page 84.
3Start Infrared Communication.
(1)Oppose the infrared port of the mobile phone (D) to that of the machine (B) at a distance of less than 7.87" / 20 cm (C).
Note
zThe effective angle of the IrDA port of the machine is about 10° from the central axis in both vertical and horizontal directions (A).
zThe allowable distance of communication with the machine depends on the mobile phone you use. For this distance, refer to your mobile phone manual.
(B)
(C)
(A)
(D)
86 | Printing Photographs from a Wireless Communication Device | Chapter 6 |