LAN settings
For details on how to set LAN settings, refer to “Printing Out Network Setting Information” and “Initializing Network Settings” of “Printing and Initializing Network Settings” in the Setup Guide.
Reset LAN settings
Restores the machine’s LAN settings to the factory default.
Print LAN details
Prints out the information of the machine’s network settings. For details on the network setting information, refer to “Printing Out Network Setting Information” in the Network Guide.
Important
This printout contains valuable information about your computer. Handle it with care.
Other Settings
Date display
Changes the display order for shooting dates to be printed.
Note
zWhen <Print date only> or <Print date & file no.> is selected for <Date/file no.> in the tab 1 on the Settings (Memory Card) screen, the shooting date is printed in the date display order you selected. For Print settings, see “To Change Print Settings” on page 35.
zThe shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
You can select from <USB enabled> or
Important
If you set this setting to <USB enabled>, card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to revert this setting to
Power save setting
Specifies the time until Power saving is enabled.
You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set to <1 hour>.
Adjust contrast
Use this to adjust the contrast of the LCD if it is too low or too high.
106 | Changing the Machine Settings | Chapter 10 |