zContinuous printing on the same type/size of paper by using both the Auto Sheet Feeder and Cassette together
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches to the other one. This is useful for printing onto a large volume of paper. To use this feature, you can select this setting with the printer driver beforehand.
Important
zThis feature can be used only when printing from a computer.
zThis feature can be used only when paper of the same size and media type are loaded in the Cassette and Auto Sheet Feeder.
Note
zFor information on page size, media type, and paper support load limit for Auto Sheet Feeder or Cassette, see “Recommended Paper and Requirements” on page 20.
zFor information on the printer driver settings, refer to the Printer Driver Guide.
(A)
(A)If the Auto Sheet Feeder runs out of paper, the paper source automatically changes to the Cassette.
Changing the Paper Source
Before printing, confirm that the location where you have loaded paper is selected as a paper source. Press [Feed Switch] to change the paper source.
(A)
(B)
(C)
(A)Auto Sheet Feeder Lamp
(B)[Feed Switch]
(C)Cassette Lamp
24 | Before Printing | Chapter 1 |