1Display the Read/write attribute screen.
(1)Ensure that the memory card is not set.
If the memory card is set, remove it from the Card Slot. See “Inserting the Memory Card” on page 49.
(2)Press [Menu].
(3)Use [] or [] to select <Maintenance/settings> and then press [OK].
(4)Use [] or [] to select <Device settings> and then press [OK].
(5)Use [] or [] to select <Other settings> and then press [OK].
(6)Use [] or [] to select <Read/write attribute> and then press [OK].
2Specify the Read/write attribute.
(1)Use [] or [] to specify <Read/write attribute>.
USB enabled: | The Card Slot is used as the memory card drive of a USB- |
| connected computer only. You can read from or write to the |
| memory card. |
The Card Slot is used only for reading from both USB | |
| connections and LAN connections. Be sure to select this mode |
| when printing photos from a memory card. |
(2) Press [OK]. |
|
Note
When using the Card Slot as the memory card drive of the computer, the removal operation from the computer is needed before removing the memory card from the machine.
Over a USB connection:
Over a wireless or wired LAN connection:
The removal operation is not needed.
Be sure to drag the icon into the Trash.
102 | Reading from and Writing to a Memory Card | Chapter 9 |