Note
Adjusting the Print Head Manually
If the Automatic Print Head Alignment does not work or if you wish to adjust the print heads manually, follow the procedure below.
1.Press [ON/OFF] to turn on the machine, and then load two sheets of
2.Ensure that the proper paper source is selected.
3.Display the Maintenance screen.
4.Use [
] or [
] to select <Manual head align>, then press [OK].
5.Use [
] or [
] to select <Yes>, then press [OK]. The Print Head alignment pattern is printed.
6.When <Did the patterns print correctly?> is displayed, confirm that the pattern is printed correctly, use [
] or [
] to select <Yes>, and then press [OK].
The input screen for the head position adjustment value is displayed.
7.Check the printed patterns and use [
] or [
] to input the number of the pattern in column A that has the least noticeable streaks.
8.Press [
] to move the cursor to column B, and then use [
] or [
] to input the number of the pattern that has the least noticeable streaks.
9.Repeat the procedure until you finish inputting the pattern number for column P. 10.When you have finished inputting all pattern numbers, press [OK].
Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD
Cause | Action |
Cannot see the display properly on | Adjust the contrast of the LCD in the <Adjust contrast> menu in the |
the LCD/The display on the LCD is | <Maintenance/settings>. See “Changing the Machine Settings” on |
illegible. | page 103. |
|
|
Cannot see the display on the LCD. | z The machine is not powered on. |
| The machine will power ON and the LCD will display a message when |
| you connect the power cord and press [ON/OFF]. |
| z The LCD may be in the |
| On the Operation Panel, press a button other than [ON/OFF]. |
|
|
130 | Troubleshooting | Chapter 12 |