Chapter 2
Copying
Making Copies
This section describes the basic procedure to make copies.
1Prepare for copying.
(1)Press [ON/OFF] to turn on the machine. See “Turning on the Machine” on page 18.
(2)Press [COPY].
(3)Load paper.
See “Loading Paper” on page 20.
(4)Ensure that the proper paper source is selected. See “Changing the Paper Source” on page 24.
Note
Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
(5)Load the document on the Platen Glass.
Note
For information on the types and conditions of documents which you can copy, see “Loading Documents” on page 19.
2Start copying.
(1)Check the page size and media type.
Note
Press [Settings] to check or change the page size, media type, or other settings. See “To Change Print Settings” on page 35.
(2)Use [
] or [
] to specify the number of copies.
(2)
(1)
The following information is displayed as well.
Intensity: | Pressing [ ] decreases the intensity, and pressing [ ] increases the |
| intensity. |
You can also use the auto intensity. See “Print Setting Items” on page 37.
40 | Copying | Chapter 2 |