(2)Use [
] to enlarge or [
] to reduce the cropping frame size, respectively.
(3)Use [
] or [
] to switch the cropping frame between portrait and landscape.
4Finalize your selection of trimming area.
(1)Press [OK].
The area to be cropped is specified, and the original photo is displayed.
Note
zThe cropped image cannot be newly saved on the memory card.
zThe trimming area is displayed only for photos which have been trimmed.
zTo change the trimming area once it has been set, press [Trimming] again.
zTo cancel trimming while editing the trimming frame, press [Stop/Reset] while the trimming edit screen is displayed. You can also cancel trimming by switching to any mode other than Memory card mode.
zTo cancel trimming after trimming has been set, press [Trimming] and then press [Stop/ Reset].
Printing Several Photos on a Single Sheet of Paper (Layout print)
You can print the specified photos in the specified layout.
1Prepare for printing.
See “Prepare for printing.” on page 51.
2Select the print menu.
(1)Press [MEMORY CARD].
(2)Use [
] or [
] to select <Special photo print>, then press [OK].
(3)Use [
] or [
] to select <Layout print>, then press [OK].
56 | Printing from a Memory Card | Chapter 3 |