Scanning a Film
This section describes how to scan 35 mm film strips and slides. Also mount film in the film guide in the same way as that of scanning with the machine when scanning films from your computer.
35 mm film strip | 35 mm slide |
1Press [ON/OFF] to turn on the machine.
See “Turning the Machine ON and OFF” on page 18.
2Select the type of original to scan.
(1)Press [PHOTO/FILM].
(2)Use [
] or [
] to select <Print from film>, then press [OK]. The film placement guidance screen is displayed.
(2)
3Select the type of film to scan.
(1)Use [
] or [
] to select the type of film to scan. The following type of film can be selected.
Color negative film, Black & white negative film, Color positive film, and Mount (for slides)
(2)Press [OK].
The procedure to set the film is displayed.
Follow the screen to load the film. Press [OK] to move to the next display.
Chapter 4 | Photo Printing from Photo or Film | 67 |