Image becomes too dark or too bright when cropping frame is moved, expanded or contracted
Cause |
| Action | |
Changing the size or position of the | Perform the following procedures in Advanced Mode in ScanGear MP. | ||
cropping frame selects | 1. | Click [Preview] to rescan the preview image. | |
inappropriate color data. | |||
2. | Confirm that the display mode is set to [Thumbnail Display]. | ||
| |||
| If the display mode is set to Thumbnail Display Off, click [Thumbnail] to | ||
| change to Thumbnail Display On. | ||
| 3. | In the [Apply the tone value to all frames] section, click [Apply]. | |
| 4. | Adjust the cropping frame. | |
| 5. | Click [Scan]. | |
|
|
| |
Trouble scanning with MP Navigator
Cause | Action |
The film may not be scanned | Click [Specify] in Scan settings in MP Navigator, and set the [Film Type] to |
correctly when [Film Type] is set to | match the type of the film to scan, and scan it again. For more information, |
[Auto]. | refer to the Scan Guide. |
|
|
Frames are not detected correctly
Cause |
| Action | |
Some types of frames of film are not | Click the Thumbnail Display On icon | to change the display mode to | |
detected correctly. | Thumbnail Display Off | (all film is displayed) in Advanced mode in | |
| ScanGear MP, and scan it. |
|
|
| Adjust the cropping frame again. For more information, refer to the Scan | ||
| Guide. |
|
|
|
|
|
|
Chapter 12 | Troubleshooting | 157 |