Note
zPress [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
zYou can also select the paper source with the printer driver when printing from the computer. For details, refer to the Printer Driver Guide.
Loading the Print Media in the Auto Sheet Feeder
zLoading Paper
Note
For detailed information on the specialty media Canon provides for use with its various printers, see “Recommended Paper and Requirements” on page 20.
1Flatten the four corners of the paper before loading it.
Note
zAlign the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams.
zWhen paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. See “Paper is curled.” on page 138.
2Prepare to load paper.
(1)Open the Paper Support, then pull out the Paper Support Extension to support the paper.
(2)Press the Open Button to open the Paper Output Tray.
(3)Pull out the Paper Output Tray Extension completely.
Note
After printing, to put back the Paper Output Tray Extension, push it back while raising it a little.
Chapter 1 | Before Printing | 25 |