Connecting to a PictBridge Compliant Device
To connect a PictBridge compliant device to this machine, use the USB cable supplied with the device.
Caution
Do not connect any equipment other than PictBridge compliant devices, Canon Bubble Jet Direct compatible digital cameras or optional Bluetooth Units
Note
When printing photos with the digital device connected to the machine, it is advisable to use the AC adapter supplied with the device. If you use the device battery, be sure to charge it fully.
1Set up the machine.
Refer to the Setup Guide to set up the machine and make it ready for printing.
Note
The Print Head cannot be aligned using the controls of the digital device. If the Print Head alignment is not yet performed, execute automatic Print Head alignment, see “Aligning Print Head automatically” on page 120.
2Turn on the machine.
See “Turning on the Machine” on page 18.
3Load the paper in the machine.
See “Loading Paper” on page 20.
4Connect the PictBridge compliant device to the machine.
Note
Depending on the model or brand of your device, you may have to select a print mode compliant with PictBridge before connecting the device.
You may also have to turn on the device or select Play mode manually after connecting the device to the machine.
Perform necessary operations according to the instruction manual supplied with the PictBridge compliant device.
(1)Ensure that the device is turned off.
76 | Printing Photographs Directly from a Compliant Device | Chapter 5 |