(3)Press [Color] for color copying, or [Black] for black & white copying. The machine starts copying.

Note

To cancel copying, press [Stop/Reset].

„Reducing or Enlarging a Copy

You can reduce or enlarge copies.

1Prepare for copying.

See “Prepare for copying.” on page 40.

2Select the reduction/enlargement method.

The example below assumes that you will select <Zoom (25-400%)>.

(1)Press [Settings].

(2)Use [] or [] to select Tab 1.

(3)Use [] or [] to select <Magnification>, and use [] or [] to select <Zoom (25- 400%)>.

Specify the custom copy ratio for reducing or enlarging copies.

(3)

Besides <Zoom (25-400%)>, you can also choose from the following reduction/ enlargement methods.

Same magnification: Copies in the same size as an original.

Preset ratio:

Preset ratios are convenient when changing between standard page sizes,

 

for example, when reducing A4 to A5, or enlarging B5 to A4.

Fit-to-page:

You can automatically reduce or enlarge the document to fit the size of the

 

paper which are loaded in the Auto Sheet Feeder or Cassette.

(4)Press [] to move the cursor down, and use [] or [] to select the setting value. Holding down [] or [] steps through the values faster.

Note

When you choose <Fit-to-page>, the document size may not be detected correctly depending on the document. In that case, choose <Same magnification>, <Preset ratio> or <Zoom (25- 400%)>.

3Finalize your selection.

(1)Press [Settings].

Return to the Copy standby screen.

4Start copying.

See “Start copying.” on page 40.

Chapter 2

Copying

41