Cisco Systems 78-16845-01 manual Viewing the Link Table, File

Chapter 3 Building the Network

3.6.3 Viewing the Link Table

Table 3-9 Supported NE Links (continued)

NE Model	NE Card	Physical	OTS	OMS	OCH	SONET/SDH	Layer 2
ONS 15808	TT/RT	X			X
	Mux/Demux	X		X
	Amp	X	X
	BCS-LH	X	X
	BCS-ELH	X	X
CRS-1	16-OC48	X
	4-OC192	X
	1-OC768	X
	8x10GE	X
XR 12000	16-OC48	X
	4-OC192	X
	1-OC768	X
	8x10GE	X
MDS 9000	Supports links with	X
	CTC-based NEs and
	unmanaged NEs

3.6.3 Viewing the Link Table

The Link table shows information about each link attribute. Use the Link table to view, modify, and delete links. You can open the Link table for the CTM domain, network partition, subnetwork, group, or NE.

•If you select the CTM domain, network partition, subnetwork, or group, the Link table shows all links that terminate on any of the NEs contained in the CTM domain, subnetwork, or group.

•If you select an NE, the Link table shows all links that terminate on that particular NE.

Open the Link Table using one of the following methods:

•	From the Network Map—In the Domain Explorer or Subnetwork Explorer, choose	File >
	Network Map. In the Network Map, select a network partition, subnetwork, group, or NE; then,
	choose Configuration > Link Table.
•	From the Network Map—Right-click a link and choose Link Table from the shortcut menu.
•	From the Domain Explorer—Select the CTM domain, group, or NE; then choose	Configuration >
	Link Table.

•From the Subnetwork Explorer—Select the CTM domain, network partition, subnetwork, or NE; then, choose Configuration > Link Table.

Note A link is visible in the Link table even if the source or destination NE has been deleted. If the NE is deleted from the Deleted Network Elements group, the references to that NE are removed from the Link table.

Cisco Transport Manager Release 6.0 User Guide

3-34 78-16845-01