Filtering the Link Utilization Table | Cisco Systems 78-16845-01

Chapter 3 Building the Network

3.6.10 Filtering the Link Utilization Table

Depending on the number of provisioned circuits, the consumed bandwidth is totaled. Circuits such as VAP/LAP and virtual tributary (VT) tunnel are preprovisioned and are not included in the calculation. This is applicable to SONET and SDH.

Example: In SDH, for a STM4 link, the total bandwidth is (4 x 155) Mbps, where STM-1 = 155 Mbps.

To view the Link Utilization table:

Step 1 In the Domain Explorer window, choose Configuration > Link Table. The Link table opens.

Step 2 In the Link table, choose Configuration > Link Utilization Table. Table 3-15provides descriptions.

Table 3-15	Field Descriptions for the Link Utilization Table

Column		Description

STS ID (SONET only)		Displays the STS ID.

VT1.5 ID (SONET only)		Displays the VT 1.5 ID.

VT2 ID (SONET only)		Displays the VT2 ID.

VC4 ID (SDH only)		Displays the VC4 ID.

VC3/TUG3 ID (SDH only)		Displays theVC3/TUG3 ID.

TUG2 ID (SDH only)		Displays the TUG2 ID.

VC12 ID (SDH only)		Displays theVC12 ID.

VC11 ID (SDH only)		Displays theVC11 ID.

Circuit Name		Displays the circuit name.

Circuit Type		Displays the circuit type.

Circuit Protection Type		Displays the circuit protection type.

Customer ID		Displays the user-defined customer ID.

Service ID		Displays the user-defined service ID number.

3.6.10 Filtering the Link Utilization Table

Step 1 In the Link Utilization table, choose File > Filter (or click the Filter Data tool). The Filter dialog box opens.

Step 2 Specify the filter parameters described in Table 3-16.

Step 3 Click OK to run the filter.

Cisco Transport Manager Release 6.0 User Guide

	78-16845-01	3-45

Image 45

Cisco Systems 78-16845-01 manual Filtering the Link Utilization Table, Column Description

Contents

Overview Building the Network Adding Groups How Do I Build Groups?Copying Groups Field Description Moving Groups Deleting GroupsDeleting a Single Group How Do I Build Network Partitions? Adding Network PartitionsDeleting Multiple Groups Deleting Network Partitions Modifying Network Partitions Adding Subnetworks How Do I Build Subnetworks? How Do I Build NEs? Moving SubnetworksDeleting Subnetworks Prerequisites for Adding NEs Prerequisites for Adding ONS 15216 EDFA2 or EDFA3 NEsPrerequisites for Adding ONS 15302 and ONS 15305 NEs Building the Network Prerequisites for Adding NEs Hostnames and IP Addresses Required An Efficient Network Topology Setup Prerequisites for Adding Cisco CRS-1 and XR 12000 NEs Prerequisites for Adding ONS 1580x NEs Prerequisites for Adding Cisco MGX Voice Gateway Devices Prerequisites for Adding Cisco Catalyst 6509 NEs Option Description Setting Up Nonstandard Community Strings Changing the Service-Level Passwords Using the CLI Adding a Single NE Adding NEs NE ID NE ID- Read-only Adding Multiple NEs Field Descriptions for the Add New NE Wizard NE Properties Panel Not selectable if Automatic subnetwork Grouping is enabled Moving an NE from One Group to Another Copying an NE from One Group to Another Automatically Grouping NEs in Subnetworks Moving an NE from One Network Partition to Another Deleting a Single NE Deleting NEs Deleting Multiple NEs Removing a Deleted NE How Do I Build Links? Restoring a Deleted NESearching for an NE Overview of Supported Links ONS 15454 Sonet Layer NE Model NE Card Physical OPT-BST ONS 15600 Sonet File Viewing the Link Table 10describes the fields in Link table Field Description Filtering Links in the Network Map Filtering the Link Table Creating Links Building the Network Creating Links 12 Field Descriptions for the Create Link Wizard Field Descriptions for the Create Link Wizard Modifying Links FieldLink Type Link Validity Link Color 14 Field Descriptions for the Modify Link Wizard Viewing Link Utilization Deleting Links Column Description Filtering the Link Utilization Table How Do I Use Network Maps? Customizing a Network MapPayload Type Description Click UI Properties Viewing a Node in the Network Map Adjusting the Zoom Level or Pan Position Modifying a Node Icon or a Map Background Image Modifying a Node IconModifying a Map Background Saving Changes to the Network Map Discovering CTC-Based NEs Discovering ONS 155xx NEsDiscovery Information Table Time stamp Rediscovering ONS 155xx, CRS-1, and XR 12000 NEs Resetting the Resync Interval How Do I Discover the Network for MGX Voice Gateway Devices? Message Quality Description Discovering NEs Setting Up External or Line Timing for CTC-Based Sonet NEs Building the Network Bits 1 OUT Setting Up Internal Timing for CTC-Based Sonet NEs OOS Setting Up External or Line Timing for CTC-Based SDH NEs Unframed , FAS , FAS + CAS Bits 1 OUT Setting Up Internal Timing for CTC-Based SDH NEs Viewing Clocking Sources Configuring Global Clocking Displaying the List of Available Clock SourcesDisplaying the List of Manual Clock Sources How Do I Test Connectivity for Optical and Routing Devices? Creating a Manual Clock SourceMethod Description Testing NE Connectivity How Do I Test Connectivity for MGX Voice Gateway Devices?Pinging an NE Cisco Transport Manager Release 6.0 User Guide 78-16845-01