Chapter 3 Building the Network

3.9 How Do I Discover the Network for MGX Voice Gateway Devices?

Routing table and protocol information

Step 1 In the Domain Explorer window, choose Administration > Control Panel.

Step 2 Expand NE Service.

Step 3 Select an NE and change the Resync Interval field in the Resync Scheduling area.

Step 4 Click Save.

3.9How Do I Discover the Network for MGX Voice Gateway Devices?

The CTM discovery service:

Collects information from individual MGX NEs

Discovers new NEs

Updates device-level information (such as inventory and alarms)

CTM supports discovery for MGX chassis and subchassis components using IP addresses, address lists, or IP address ranges as input.

The specific NE components to be discovered and displayed in the GUI are:

MPSM

PXM-1E

PXM45 card

VXSM card

VISM-PR card

RPM-XF card

RPM-PR card

AXSM/B card

AXSME card

SRME card

SRME/B card

Connections

CTM provides subchassis component discovery (configuration upload and parse) and sync up, as well as autonomous trap processing of configuration changes. Sync up is initiated periodically.

Note The Discovered Network Elements group can only be viewed by SuperUsers and NetworkAdmins in cases where all NEs are assigned to them. Therefore, in the Add Network Element(s) wizard, the grouping option “Group the Discovered NE(s) in the Discovered Network Elements Group” is not available.

Cisco Transport Manager Release 6.0 User Guide

3-54

78-16845-01

 

 

Page 54
Image 54
Cisco Systems 78-16845-01 manual How Do I Discover the Network for MGX Voice Gateway Devices?