Cisco Systems MGX 8220 Main Cooling and Booster Cooling Kit

7-22
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter
Cable Management
Figure7-16 Cable Management Kit on the Plenum Chamber
Main Cooling and Booster Cooling Kit
The cable management kit that is ins talled on the cooling module and booster cooling module consists
of a set of brackets, a power routing assembly, and the cable management panel as shown in Table7-2.
Cable management panel,
attach with 10-32 screws with
lock nuts and washers
Plenum chamber
Inner bracket,
attach with 10-32 thread
forming (self tapping)
screws and washers
Outer bracket, attach
with 10-32 screws with
locking nuts
Attach bracket to rear rail (if
present)using 10-32 thread
forming screws
H8288
Table7-2 Cooling and Booster Kit
Description Quantity
Number 10 flat washer 12
10-32, 0.375 in. long screws with locking nuts 8
10-32, 0.375 in. long thread forming screws 8
Cable support 2
Power and fan cable management assembly 2
Short fan panel bracket 2
Cable management panel 1