Cisco Systems MGX 8220 FRSMs for High Speed Serial Lines

4-9
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter Frame Relay Service Modules (FRSMs)
FRSMs for High Speed Serial Lines
There are three FRSMs for high sp ee d serial lines.
•AX-FRSM-HS1 supports back cards that provide either two HSSI interfaces or four X.21
interfaces.
•MGX-FRSM-HS1/B su pports a back card t hat provides four V.35 interfac es.
•MGX-FRSM-HS2 supports a back card that provides connections for two HSSI lines.
AX-FRSM-HS1 and MGX-FRSM-HS1/B Features
Both FRSM-HS1 modules support the following features:
•Card throughput of 20 Mbps (bidirectional) at an average frame size of 130 octets.
•HSSI line rates of up to 16 Mbps when a single port is configured per card. HSSI line rates of up
to 8 Mbps when both HSSI ports are configured.
•X.21 line rates of 1 port x 10 Mbps, 2 ports x 8 Mbps, 3 ports x 4 Mbps, or 4 ports x 4 Mbps.
•Up to 200 virtual connections in DTE and DCE modes.
•1:1 redundancy using Y-cabling.
•All standard MGX 8220 edge concentrator FRSM features, including the same data link protocols
as other FRSMs.
•ForeSight integrated on the high-sp eed F R SM as a f eat ur e li cen se.
•FR-ATM network internetworking and service internetworking support.
•Configuration of ATM Frame use r network interface ( F UN I ) o r ATM Frame NNI on a per-port
basis.
•Frame forwarding and FUNI support.