Cisco Systems MGX 8220 AUSM LED Indicators

4-19
Cisco MGX 8220 Installation and Configuration
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter ATM UNI Service Module
AUSM LED Indicators
The AUSM LED indicators are describe d in Table 4-1. All LED indicators are lo cated on the faceplate
of the front card.
Table4-1 AUSM LED Indicators
Type of LED Color Meaning
ACT Green On indicates the card set is i n a ctive mode.
STBY Yellow •Slow blink without the Active LED indicates the card is in the
boot state.
•Fast blink with the Active LED in d ica tes th e c ard is being
downloaded.
•Fast blink indicates the servic e modul e is passin g BRAM channe l
information to the ASC.
•Steady yellow indicates the card is in Standby mode and the
firmware is executing ADMIN code.
FAIL Red •Steady Re d w ith Active and Standby L EDs off indicates eithe r
the card is in the Reset con d it io n or t he car d h as f ail ed .
•Steady Red with Active LED on ind ica tes th e c ar d was act ive
prior to failing.
•Steady Red with Standby LED on indicates the card was sta ndby
prior to failing.
PORT Green Green indicates the por t i s ac tive.
Red Red indicates a local alarm on t he p ort.
Yell ow •Yellow indicates a remote alarm on th e p o rt.
•Off indicates the por t ha s not been activated (up p ed ).