Appendix C Firmware Upgrade and Downgrade Procedures

Graceful Upgrade and Downgrade Procedures

d.Enter the version command. This command displays the version of the boot code currently stored in Flash memory. This step downloads new firmware into the ASC.

e.Enter the switchcc command to switch to the other ASC.

f.Enter the tftp put <ASC_BT_file> AXIS_ASC_BACKUP.FW command. This step downloads the new boot code into the second ASC.

g.Enter the chkflash command. This command calculates and compares the Flash checksum to verify whether the boot code is correct.

h.Enter the version command. This command displays the version of the boot code currently stored in Flash memory. This step downloads new firmware into the ASC.

i.Enter the donotupdatestandby command.

j.Enter the tftp put <ASC_FW_file> AXIS_ASC_STANDBY.FW command.

k.Check the file size of the downloaded firmware. Use this step to check that the firmware was downloaded successfully to the ASC disk.

l.Enter the dspfwrevs command to verify the correct firmware revision.

Step 6 For all SMs

a.Enter the tftp put <SM_BT_file> AXIS_SM_1_$slot.BOOT command.

b.Enter the chkflash command. This command calculates and compares the Flash checksum to verify whether the boot code is correct.

c.Enter the version command. This command displays the version of the boot code currently stored in Flash memory. This step downloads new firmware into the ASC.

Step 7 For all SMs

a.Enter the tftp put <SM_FW_file> AXIS_SM_1_$slot/0.FW command.

b.Check the file size of the downloaded firmware. Use this step to check that the firmware was downloaded successfully to the ASC disk.

c.Enter the dspfwrevs command to verify the correct firmware revision.

d.Enter the resetcd <standby_ASC> command. This command resets the standby card.

e.Enter the resetcd <active_ASC> command. This command resets the active card.

Step 8 For all stand-alone SMs, enter the resetcd <stand-alone>command. This command resets the stand-alone card.

Step 9 For all primary SMs in all redundancy groups

a.Enter the softswitch <primary_SM> <secondary_SM> command.

b.Enter the softswitch <secondary_SM> <primary_SM> command.

Step 10 For all SMs, enter the dsptotals command.

This step is to examine the number of lines, ports, and channels after the upgrade or downgrade. The values can be compared to those before the download and, therefore, it can be established that the configuration has remained the same. Restore the ASC and SM configurations if necessary.

 

 

Cisco MGX 8220 Installation and Configuration

 

 

 

 

 

 

 

Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003

 

 

C-41

 

 

 

 

 

Page 298 Page 300
Page 299
Image 299
Cisco Systems MGX 8220 manual Enter the tftp put SMBTfile AXISSM1$slot.BOOT command
Page 298 Page 300

MGX 8220 specifications

The Cisco Systems MGX 8220 is a versatile, high-performance media gateway that has become an integral component in the telecommunications infrastructure. Designed to facilitate the transition from traditional circuit-switched networks to advanced packet-switched environments, the MGX 8220 supports a wide array of voice, video, and data services, making it an essential tool for service providers and enterprises seeking to enhance their network capabilities.

One of the key features of the MGX 8220 is its robust signaling and media processing capabilities. Equipped with support for both Voice over IP (VoIP) and traditional telephony protocols, this gateway enables seamless integration of different communication formats. It boasts a modular architecture, which allows for the addition or removal of various line cards to meet changing demands and technology advancements. This modularity provides operators with the flexibility to scale their services without significant overhauls to their existing infrastructure.

The MGX 8220 is capable of delivering high-density media handling for a multitude of services. With its support for ATM and IP networks, the gateway can handle TDM (Time-Division Multiplexing) to packet voice conversions efficiently. It is designed to optimize network resources by dynamically allocating bandwidth based on traffic requirements, thus ensuring efficient use of network resources and improved performance.

Another significant characteristic of the MGX 8220 is its enhanced quality of service (QoS) features. This capability ensures that voice and video traffic is prioritized appropriately, minimizing latency and jitter while maximizing overall call quality. By employing sophisticated traffic management techniques, the MGX 8220 can deliver a superior user experience, which is critical for any service provider aiming to offer competitive communication solutions.

Furthermore, the gateway includes built-in security features to protect against unauthorized access and ensure the integrity of sensitive data. This includes encryption for voice and video transmission, as well as support for secure signaling protocols.

Overall, the Cisco Systems MGX 8220 stands out as a comprehensive media gateway solution, providing essential functionalities for modern communication needs. Its combination of modularity, high-density processing, effective QoS management, and security features makes it a compelling choice for organizations looking to modernize their telecommunications infrastructure while ensuring reliability and performance. As businesses continue to evolve and demand more from their networks, the MGX 8220 offers a pathway to future-ready communications.
Top Page Image Contents