IM584000300 | Installation Instructions |
Issue AB, April 3, 2013 | Spec. No. 584000300 (Model |
|
|
Top Plate
Two options available:
1)P/N 554472.
Holes sized for imperial conduit fittings
(25mm [1”] conduit fittings except AC Input and External Battery which are 32mm [1.25”] conduit fittings).
2)P/N 554473.
Holes sized for corded connections
using metric cord grips (38mm [1.5”] holes).
DC Loads
Emerson Network Power DCM IT Rack
Alarm
Building Ground *
External Battery 2
External Battery 1
AC #2
AC #1
* Ground Bar Provided on Rear of IT Rack
Note: Cables can also be fed from bottom for raised floor applications.
Front
DC Distribution Leads Openings for 25mm (1”) Conduit
(snap bushings are furnished for use without conduit)
AC Input Leads Opening for 25mm (1”) Conduit
Distribution | Alarm Leads Opening | |
for 25mm (1”) Conduit | ||
| ||
|
Battery Leads Openings
for 19mm (0.75”) Conduit
(top and bottom)
Power and Control
Battery
Tray
Rear
Figure
Top Feed Cable Landing Diagram – Factory Provided IT Rack
Page 14 | Chapter 3. Making Electrical Connections |
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
