Emerson NGA 2000 TO2 System & Network I/O Module CON Trols Setup, 37.50 ppm, System SIO module…

Instruction Manual

760008-A September 2001

Model NGA 2000 TO2

3-6 SYSTEM & NETWORK I/O MODULE CON-

TROLS (SETUP)

This menu provides access to several sub- menus for setting parameters of the SIO (Sig- nal Input/Output) and DIO (Digital Input/Output) of the analyzer.

Main Menu

↓

Analyzer and I/O, expert controls and setup…

TO2 37.50 ppm

-- Analyzer and I/O Expert Controls and Setup --

Analyzer module controls…

System & network I/O module controls…

Analyzer module setup…

System & network I/O module setup…

(Note: Controls & setup are identical for MLT/FID)

Measure	Channel	Back…
TO2			37.50 ppm

-- System & Network I/O Module Controls --

System SIO module…

System DIO module…

Measure <<< Back… >>>

Press the ↵ or → keys to change to the desired submenu.

If there is no SIO module installed in the ana- lyzer, a corresponding message will be displayed instead of the menu.

Figure 3-24. System & Network I/O Module Controls

3-24 Operation Rosemount Analytical Inc. A Division of Emerson Process Management