Model NGA 2000 TO2
Instruction Manual
Special Scaling for Concentra- | c. Serial Interface Setup |
tion Signal |
|
TO2 | 37.50 ppm |
| (Scaling is the same as range limits) |
|
|
Output #1: | Yes |
Output #2: | Yes |
Output #3: | Yes |
Output #4: | Yes |
Output #5: | Yes |
Output #6: | Yes |
Output #7: | Yes |
Output #8: | Yes |
Measure | Back… | More… |
From menu System SIO Module (Figure
TO2 | 37.50 ppm | |||||
|
|
|
|
| ||
|
|
|
|
|
| |
| Baud rate: |
|
| 19200 |
| |
| Data bits: |
|
| 8 |
| |
| Stop bits: |
|
| 1 |
| |
| Parity: |
|
| None | ||
| Echo mode: |
|
| Disabled | ||
| Handshake: |
|
| Xon/Xoff | ||
| Transmission delay: |
| 0 |
| ||
| Type of installed serial interface: |
| RS232 | |||
| Communication protocol: |
| AK | |||
| Special protocol definitions… |
|
|
| ||
| Measure |
|
| Back… |
|
|
This menu allows for the setting of each of the 8 outputs to be the same as the range limit “Yes” or as set on the previous menus.
See Section
Pressing F5 (More…) changes to the submenu Analog Output Updates per Second.
Pressing the F5 (More…) key changes to the submenu “Analog Output Updates per Second.”
Analog Output Updates Per
Second
TO2 |
| 37.50 ppm |
| ||
|
|
| |||
|
|
|
| ||
| Output #1: | 10 |
| ||
| Output #2: | 0 |
| ||
| Output #3: | 0 |
| ||
| Output #4: | 0 |
| ||
| Output #5: | 0 |
| ||
| Output #6: | 0 |
| ||
| Output #7: | 0 |
| ||
| Output #8: | 0 |
| ||
| Measure |
| Back… |
|
|
This menu allows for the setting of the update rate for each of the 8 outputs.
In this menu, the parameters for data transfer between the analyzer and exter- nal devices are set. The choices in this menu depend on the configuration of the analyzer. The full specification of the se- rial interface is described in its own man- ual.
Options:
Baud rate: 300, 1200, 2400, 4800, 9600, 19200
Data bits: 7, 8
Stop bits: 1, 2
Parity: None, Even, Odd
Echo mode: Enabled, Disabled
Handshake: None, Xon/Xoff
Transmission delay: 0…100.
Type of installed serial inter- face:
RS232
RS485/2w
RS485/4w
RS485/4w bus
None
Rosemount Analytical Inc. A Division of Emerson Process Management | Operation |
